Designation:A 572/A 572M 01 American Association State Highway and Transportation Officals Standard AASHTO No.:M223 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel1 This standard is issued under the fixed designation A 572/A 572M; the number immediately following the designation indicates the year of original adoption or, in the case of A690 "Mariner" Steel:The Facts [iSheetPile] - Think GradeYield Strength S 240 GP35 ksi S 270 GP39 ksi A32839 ksi A 69050 ksi A572 Grade 5050 ksi A58850 ksi S 355 GP52 ksi A572 Grade 6060 ksi S 430 GP62 ksi A572 Grade 6565 ksi S 450 GP65 ksi. ASTM A690 (or, Mariner Steel) was created and promoted by US Steel in the 1960s.
The ASTM A572 specification is the Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel for plates used in general construction and structural applications. ASTM A572 includes five grades with specified minimum yield strengths of 42, 50, 55, 60, and 65 ksi, respectively. For applications where notch toughness is important, consult SSAB for specific Charpy V-notch toughness ASTM A572 Grade50,55,60 HSLA Structural Steel Plate-AGICOASTM A572 Carbon Steel Plate. ASTM A572 Specification refers to High-Strength Low-Alloy Steel Plate for structural building, among the 5 steel grades of 42, 50, 55, 60 and 65, Grade 50 is one most common steel in applications where need more strength and less weight, use steel plate of this grade other than ordinary carbon steel will make the steel structure with same steel strength but ASTM A572/A572M-18 Red - Standard Specification for High 1.1 This specification covers five grades of high-strength low-alloy structural steel shapes, plates, sheet piling, and bars. Grades 42 , 50 , and 55  are intended for riveted, bolted, or welded structures. Grades 60  and 65  are intended for riveted or bolted construction of bridges, or for riveted, bolted, or welded construction in other applications.
1. Meet all requirements of ASTM A572/A572M-94c Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel Grade 50; 2. The steel shall be made to a practice producing nitrogen not greater than 0.012% or steel shall be made to a practice producing nitrogen not greater than 0.015% and nitrogen binding elements shall be added; SPECIFICATIONS - DEL METALS(M Shapes) Standard I Beams to 52 Kg/m Over 52 (S Shapes) Kg/m H Bearing Piles to 152 Kg/m Over 152 (HP Shapes) Kg/m Standard Channels to 30.8 Kg/m Over 30.8 (C Shapes) Kg/m Miscellaneous Car & to 42.4 Kg/m Over 42.4 Kg/m Shipbuilding Channels (MC Shapes) Angles, Bulb Angles, to 13 mm thk. Over 13 mm to 20 mm thk. Over 20 mm thk. Zees and Rolled Tees SUBSTITUTE MATERIAL (JIS, BS, DIN ) FOR ASTM The requirements of the ASTM Specifications not covered by the substitute specifications are noted in the Tables, with footnotes given on Section 4. Strength Carbon Steel Plates, Shapes, and Bars Gr 55 --- 1501-161 Gr 400 17155 H I 1501-224 Gr 400 Gr 60 G 3118 SGV410 1501-161 Gr 430 17155 H II 1501-224 Gr 430 Gr 65 G 3118 SGV450 1501
ASTM A572 Grade 50 - A572 Grade 42,50,60,65 Steel A572 Grade 60 HEB beams megabite.ASTM A36 H Beam GNEE GROUP.ASTM A36 A572 Gr.50 H beams,the standard specification for steel structural shapes for use in general construction.We are ASTM A36 H beam suppier,and the (HEA HEB IPE 25 30days) ASTM A36 H Beams Chemical Composition for ASTM A36 H steelwise - AISC Home American Institute of Steel listed should be confirmed prior to their specification. M-shapes and S-shapes with a higher yield and tensile strength can be obtained by specifying ASTM A529 Grade 55, ASTM A572 Grades 55, 60 and 65 or ASTM A913 Grades 60, 65 or 70. Atmospheric corrosion resistance (weathering charac-teristics) can be obtained by specifying ASTM A588 Grade 50. These and other material specifications applicable ASTM A572 Grade 50 Steel Plates and A572m 55/ 60/ 65 A572 Gr 60 steel has excellent weldability and can be welded with simple techniques and common consumables such as E7018. A572 Grade 60 Plate. astm a572 grade 60 is used for structural steel shapes in the construction of building, bridges or similar structures. It